MPP Arastradero Telsa Model 3 Rear Camber Arms

Our Rear Upper Control Arms (Camber Arms) take everything we've learned from motorsport and road car performance for over 15 years and apply it to the Tesla Model 3 rear upper control arm. We know how important it is for suspension arms to be easy to adjust, have great durability even in harsh climates, and have solid bearings rather than rubber bushings for the ultimate connection to the road.

Most aftermarket suspension arms are made using either urethane bushings, which are used because they are cheap - or spherical rod ends, which are ideal for performance but don't last very long in sandy or salty environments. Our solution is to use an OEM production sealed bearing - delivering the performance of the spherical and the durability of an OE part. The sealed bearing is just like a ball joint, it is solid and has virtually no compliance, while being lubricated and protected from corrosion.

Rod ends tend to thread into a suspension arm, which makes them very easy to adjust - whereas a pressed in bearing offers no adjustment. Our solution is to use a threaded turnbuckle allowing for precise adjustment. Rather than use jam-nuts - which always affect the alignment when locking down the nuts - our clamping system allows the alignment technician to perfectly set the alignment, then tighten the clamp bolts without throwing off the camber.

The turnbuckles are made from stainless steel, as are the bolts and nuts - so they will never corrode or rust. The arms are CNC machined out of 6061 aluminum, and anodized blue for durability and aesthetics.

These arms come fully assembled at set to the factory length. We always recommend using anti-seize lubricant to prevent any galvanic corrosion between the aluminum and steel. Camber adjustment range is as much as you'd ever need for any ride height or reasonable desired camber setting. Arms come as a pair of two and are warrantied for three years from the time of purchase.

Installation Instructions HERE

Correct rear camber change caused by lower ride height, improve steering response and stability.

 

When you lower your Model 3 or Model Y, the rear suspension will gain negative camber which must be corrected to retain tire life, range and traction. The Model 3’s OEM suspension does not allow adjustment of rear camber. Our Rear Upper Control arms are designed relying on years of professional motorsport experience.

 

  • CNC’d from billet 6061-T6 aluminum rather than using steel tube, they look almost as good as they function.
  • Stainless SteelHardware for corrosion and rust protection
  • Anodized for durability and aesthetics
  • Sealed spherical bearings deliver a more responsive steering feel, increased stability and enhanced overall connection to the road. Since the bearings are sealed, these arms will last the life of the car.
  • No noise or wear unlike other brands using spherical rod ends
  • Clamps on the threads and an easy to access adjuster mean quick and precise alignments.
  • Preset to the OEM length for a quick bolt-in installation. You can install these and drive to your alignment shop without worry.

Fits these vehicles: Model 3 RWD, Dual Motor, Performance, Performance w/ PUP, Model Y AWD, Performance, Performance w/ PUP

In stock (can be backordered)

More Information
Installation Services AvailableYes
Hybridpit AvailabilityAvailable to order
PartsSuspension
ManufacturerMountain Pass Performance
Car Year2017, 2018, 2019, 2020, 2021, 2022
Car MakeTesla
Car ModelModel 3
Write Your Own Review
You're reviewing:MPP Arastradero Telsa Model 3 Rear Camber Arms