Cusco coilovers are recommended for those who want a sporty ride and increased handling without giving up daily driving comfort. Height is double adjustable and the dampening force is adjustable allowing you to fine tune the suspension feel to your liking. As with all Cusco coilovers, rust proofing and the highest quality materials ensure your performance suspension will keep performing for years to come. Cusco's pillowball top hats will provide maximum feedback from your suspension and reduce play in the coilover assembly keeping your alignment truer in turns.
【For 2WD】 Full length adjustable front and rear damping force 40 step adjustment model street ZERO - A (for e - con 2)
【Product code】 1A1-62N-CN
【JAN Code】 4996 3380 76205
【Product Specification】 Ft: Adjustable damping force 40 stages Rr: Adjustable damping force 40 stages Adjustable damping force 40 stages 【Upper mount】 Ft: Upper mount only for reinforced rubber Rr: Dedicated upper mount included ※ Each camber fixed type
【Spring rate 】 Ft: Special shape 5 kgf / mm (6 kgf / mm) Rr: Special shape 4.5 kgf / mm
Optional rate spring in () can be changed on order (free)
[Reference vehicle height] Ft: -30 mm Rr: -30 mm
[Recommended vehicle height adjustment width] Ft: -35 to -10 mm Rr: -35 to -10 mm
* By securing minimum ground clearance (front car height -40 mm when front cross member portion ground clearance 92 mm)
[Maximum vehicle height adjustment width] Ft: -50 to -5 mm Rr: -40 to 0 mm
* Maximum vehicle height adjustment width is a physical limit value on calculation and actual traveling confirmation is not carried out. Moreover, it may become outside the safety standard conformity.
[Compatible models] ZVW 50/51 (FF / 2 WD) * Type Traffic: 1.8 L / FF / A Touring
[Remarks] Disassembly overhaul correspondence (exchange with shock absorber single item is available)
【Damping adjustment method】
Due to the structure of the vehicle, the 50 series Prius can not easily adjust the damping force after mounting the car high. Please note.
☆ It is possible to easily perform the attenuation adjustment by button operation from the driver's seat by simultaneous installation of the optional electric damping force controller "e-con 2".
Front: Adjustment section upper side of shock · · · When adjusting the damping force after mounting the vehicle, it is necessary to remove the shock absorber or remove the shock top cover.
Rear: Adjustment section upper side of shock (in wheel house) · · · When adjusting the damping force after wearing the vehicle, you can adjust by turning the inner cover inside the wheel house. (Jack up of the car body, furthermore removal of the tire may be necessary)
【About TSSP equipped car】
In our test vehicle Toyota Safety Sense P (hereinafter referred to as TSSP) mounted cars, we can not confirm the malfunction of TSSP etc. by installing the vehicle height adjustment type suspension kit, but if the vehicle height drops, the malfunction of TSSP etc There is a possibility of occurrence. We are not responsible for the malfunction of TSSP etc due to the installation of this product and damage caused thereby.
|Vehicle Model(s) / Chassis Code(s)||Prius (ZVW50 / ZVW51)|