BLITZ DAMPER ZZ-R (92368) for Toyota Prius Prime
Specs
(Front)
■Spring rate : 4.0 kgf / cm 2
■ Upper mount: Reinforced rubber
■ Reference down amount: 35 mm
■ Spring free length: 220 mm
■ Spring type: ST
■ Car height adjustment range: -70 to 0 mm
(Rear)
■ Spring rate: 4.0 kgf / cm 2
■ Upper mount: genuine
■ Reference down amount: -35 mm
■ Spring free length: 255 mm
■ Spring type: BS
■ Car height adjustment range: -52 to -20 mm
■ All Lineup Shock absorber of full length adjustment adopted single cylinder (mono tube). While achieving full-length adjustment, we realized reasonable prices.
■ 32 damping force adjustment mechanism is adopted, wide damping force adjustment is possible. It corresponds to the running scene regardless of the stage from the circuit to the street.
■ Adopted aluminum upper mount, lock seat, bracket (part), etc. It achieves both high strength and light weight.
■ Adopting single cylinder type unique φ44 large-diameter piston, suppress the delay in damping force. Provide supple ride comfort and reliable follow-up (excluding some models).
■ It also corresponds to overhaul. Unlike traditional "disassembly after disposal adjustment", "Responding to new cartridge first-out" makes smooth response and demonstrates the original performance of the damper.
【Compatible models】 Prius PHV
【Model】 ZVW 52
【Eng】 2ZR-FXE
【Year 】 2017/2 ~ (H29 / 2 ~)
Specs
(Front)
■Spring rate : 4.0 kgf / cm 2
■ Upper mount: Reinforced rubber
■ Reference down amount: 35 mm
■ Spring free length: 220 mm
■ Spring type: ST
■ Car height adjustment range: -70 to 0 mm
(Rear)
■ Spring rate: 4.0 kgf / cm 2
■ Upper mount: genuine
■ Reference down amount: -35 mm
■ Spring free length: 255 mm
■ Spring type: BS
■ Car height adjustment range: -52 to -20 mm
NOTES
※ The rear damping force adjustment dial is in the wheel house.
· Removal of the wheel may be necessary for adjustment.
* Since the strut tower opening is narrow, it is necessary to remove the shock to perform camber adjustment.
※ For rear attenuation extension dial installation, drilling on panels · speaker board etc is required.
※ The height adjustment range is adjustable range when adjusting the vehicle height on the lower bracket side.
· Adjustment range may change due to grade · vehicle weight · vehicle error etc.
* It may interfere with inner fender etc. even within the height adjustment range of the car.
· In addition, after checking the minimum ground clearance, please set the vehicle height.
※ The spring type is "ST: ID 62 straight spring" "BS: barrel type or tapered type exclusive shape spring" is represented.
※ "Genuine upper mount" "genuine rubber mount" items adopted, we will reuse some genuine parts.
- When attaching from other than the genuine suspension, be careful.
* We recommend that you replace with new parts if genuine parts to be reused are defective or defective.
Installation Services Available | No |
---|---|
Hybridpit Availability | Available to order |
Chassis Code | ZVW52 |
Parts | Suspension |
Manufacturer | Blitz |
Car Year | 2016, 2017, 2018, 2019, 2020, 2021 |
Car Make | Toyota |
Car Model | Prius Prime / PHV |